The TBC5-1 Tread Band Cutter is designed to remove the long curved edges of passenger and light truck tire treads after the sidewalls have been removed and the tread has been cut at least once into a strip. Removing the curved edges allows tread bands to lay flat and be manipulated in ways that were previously impractical. The TBC5-1 creates a fixed width tread band at a high rate of speed with few moving parts. The band width is set by installing one of four interchangeable plates. The standard widths are 2.5 inches, 3.5 inches, 4.5 inches, and 5.5 inches. Specific widths can be fabricated to suit your needs.
Operating the machine is very simple:
- Load the tread into the mouth of the machine.
- Depress the foot switch.
- Guide the tread while it is processed.
Buy a tire tread band cutter from EECO today!
Function:
Remove rounded edges along treads.
- Allows treads to lay flat
- Create tread bands of consistent width
Input: Tire Treads
- Tire Tread from passenger car and light truck tires
- Tread must be cut at least once, opening the ring into a band.
Output: Fixed Width Tread Bands
- 1 Tread Band
- 2 curved edges
Production Rate:
- Average 240 treads per hour
Size & Weight:
- Floor space: 44” x 44” (1.1m x 1.1m)
- Weight: 700lbs (318Kg)
Cutting surface:
- 2 Hardened Steel Discs
- Includes 4 spacing plates (2.5", 3.5", 4.5", 5.5")
Electrical:
- 5 HP Single-Phase Leeson TEFC Motor
- 220v @ 60Hz. International customers, please call to discuss electrical needs.
- 25 Amp Peak Draw
- Requires plug for local electrical power, sold separately.
EECO has collaborated with 2 lending companies to provide financing for our customers, depending on their needs. For amounts of $500 - $20,000, a Clicklease financing application is available on every machine page. For amounts over $20,000, Partners Capital Group has a simple and straightforward application that can be found here: https://www.flexiblefinanceoptions.com/eaeco
Please keep in mind that EECO has no part in the approval process or setting interest rates. Feel free to use your own financer if a better rate is available. DO NOT SEND FINANCING APPLICATIONS TO EECO.